Supervisor Setup • Super II 32
DATBASE PRINT DATBASE GO BACK
FORMAT TRANSFR SECURTY
Select database setup option:
5 6 GO BACK
5. FULL DATABASE
6. DATABASE OFF
Choose the fields in your database:
BI OUT GO BACK
Select the port for the printer output.
1 2 3 4 MORE
Choose the fields in the database:
1. PART ID, APW, TARE
2. PART ID, LOT #, and APW
3. PART ID, APW, ACC CT
4. PART ID, LOW, TARGET, HIGH
The following menu is displayed and the soft keys change to:
Select the DATBASE FORMAT soft key for programming the database format. The following menu and
soft keys appear:
Select the desired database format by pressing the soft key for the number corresponding to the
fields to be stored and automatically retrieved through the use of the PART ID field.
To have all of the database fields available or to turn off access to the database, press the MORE
soft key followed by the number corresponding to the desired selection:
Select the PRINT TRANSFER soft key to send the database records through the RS-232 Port.
The following menu and soft keys appear:
Select BI to transmit the database records through the Bi-directional Port, or OUT to send the records
through the output only port.
To Next Page
Loading...
Need help?
General
