Supervisor Setup • Super II 44
A. To use the default prompt, press the STANDRD PROMPT soft key and the program will return to the
scale function selection menu (step 1).
B. To program a custom prompt associated with that key name and function, press the CUSTOM
PROMPT soft key. The menu will change; type in a prompt of up to 80 characters using the scale’s
alphanumeric keypad (abc key) or an attached QWERTY keyboard.
C. To automate the step without a prompt, press the AUTOMAT STEP soft key. An automated step will
process the scale function without waiting for user input.
4. To erase the last selected step in the macro, press the DELETE soft key. If all the steps are erased, the previous
screen is displayed.
5. After selecting the last step in the macro, press the DONE soft key.
To Next Page
Loading...
Need help?
General
