Sewha SI 410 - SET-UP MODE; 5-1. Set-up mode; 5-1-1. How to enter Set-up mode

- 13 -
5. Set-Up
5-1. Set-up mode
5-1-1. How to enter Set-up mode
Press key for 4 times
If “SET-UP” is displayed, it is complete to
enter the set-up mode.
 How to enter each set mode
SET-UP mode
Press key for 4 times 
Test
mode
Analog value
Press key for 4 times  
Analog Variation
Value
Press key for 4 times  
Key
Press key for 4 times  
Display
Press key for 4 times  
External Input
Press key for 4 times  
Relay Output
Press key for 4 times  
Analog out
Press key for 4 times  