Sewha SI 410 - DIAGNOSTIC TEST PROCEDURES; 5-6-1. Analog value Chcek; 5-6-2. Analog Deviation Check Mode

- 44 -
5-6-1. Analog value Chcek
Display the analog value as digitalized. Variable of
unit place is not abnormal.
(Display from -1,048,575 to 1,048,575)
If there is big variation of analog value or no change although adding load, it is doubted Load
cell problem or analog part problem in indicator.
Display from Hundred
thousand’s place.
Display from Million’s
place.
Display from Ten
Million’s place.
5-6-2. Analog Deviation Check Mode
Display the analog value as digitalized, then
make zero to check Analog Deviation.
Making zero is by pressing key..