Decimal 27 69
n
[Range] 0≤
n
≤ 255
[Description] Turns emphasized mode on or off.
·When the LSB of
n
is 0, emphasized mode is turned off.
·When the LSB of
n
is 1, emphasized mode is turned on.
[Details] ·Only the least significant bit of
n
is enabled.
·This command and ESC! Turn on and off emphasized mode in the same
way. Be careful when this command is used with ESC!.
[Default]
n
= 0
[Reference] ESC !
ESC G
n
[Name] Turn on/off double-strike mode
[Format] ASCII ESC G
n
Hex 1B 47
n
Decimal 27 71
n
[Range] 0≤
n
≤ 255
[Description] Turns double-strike mode on or off.
·When the LSB of
n
is 0, double-strike mode is turned off.
·When the LSB of
n
is1, double-strike mode is turned on.
[Details] ·Only the lowest bit of
n
is enabled.
·Printer output is the same in double-strike mode and in emphasized
mode.
[Default]
n
= 0
[Reference] ESC E
ESC J
n
[Name] Print and feed paper
[Format] ASCII ESC J
n
Hex 1B 4A
n
Decimal 27 74
n
[Range] 0≤
n
≤ 255
[Description] Prints the data in the print buffer and feeds the paper [
n
x vertical or
horizontal motion unit].
TITLE : WTP-150
Page -39 -
To Next Page
Loading...
