ESC S
[Name] Select standard mode
[Format] ASCII ESC S
Hex 1B 53
Decimal 27 83
[Description] Switches from page mode to standard mode.
[Details] ·This command is effective only in page mode.
·Data buffered in page mode and the printable area developed in page
mode are cleared.
·This command is switches the setting for the following command (in
which the values can be set independently in standard mode and page
mode) to those for standard mode:
① Set right-side character spacing: ESC SP, FS S
② Select default line spacing : ESC 2, ESC 3
·The following commands are enabled only to set in standard mode.
① Set printing area in page mode : ESC W
② Set print direction in page mode : ESC T
·The following commands are ignored in standard mode.
①
Set absolute vertical print position in page mode : GS $
②
Set relative vertical print position in page mode : GS ＼
·Standard mode is selected automatically when power is turned on, the
printer is reset, or command ESC @ is used.
[Reference] FF, ESC FF, ESC L
TITLE : WTP-150
Page -43 -
To Next Page
Loading...
