SEWOO WTP-150 - Page 46

[Name] Turn 90° clockwise rotation mode on/off
[Format] ASCII ESC V
n
Hex 1B 56
n
Decimal 27 86 n
[Range] 0≤
n ≤ 1,48≤ n ≤ 49
[Description] Turns 90
° clockwise rotation mode on or off.
n is used as follows:
n Function
0, 48 Turns off 90˚ clockwise rotation mode
1, 49 Turns on 90˚ clockwise rotation mode
[Details] ·When underline mode is turned on, the printer does not underline 90
°
clockwise-rotated characters.
·Double-width and double-height commands in 90
° rotation mode
enlarge characters in the opposite directions from double height and
double-width commands in normal mode.
·This command affects printing in standard mode. However, the setting is
always effective.
[Default]
n = 0
[Reference] ESC !, ESC –
ESC W xL xH yL yH dxL dxH dyL dyH
TITLE : WTP-150
Page -45 -