indicators blink and the printer waits for the FEED button to be
pressed. After the button is pressed, the printer executes the macro
once. The printer repeats the operation r times.
[Details] ·The waiting time is t * 100 ms for every macro execution.
·If this command is received while a macro is being defined, the macro
definition is aborted and the definition is cleared.
·If the macro is not defined or if r is 0, nothing is executed.
·When the macro is executed (m = 1), paper always cannot be fed by
using the FEED button.
[Reference] GS :
GS a
n
[Name] Enable/Disable Automatic Status Back (ASB)
[Format] ASCII GS a
n
Hex 1D 61
n
Decimal 29 97
n
[Range] 0
≤ n ≤ 255
[Description] Enables or disables ASB and specifies the status items to include, using n
as follows:
Bit Off/ On Hex Decimal Status for ASB
Off 00 0 Drawer kick-out connector pin 3 status disabled.
0
On 01 1 Drawer kick-out connector pin 3 status enabled.
Off 00 0 On-line/off-line status disabled.
1
On 02 2 On-line/off-line status enabled
Off 00 0 Error status disabled
2
On 04 4 Error status enabled.
TITLE : WTP-150
Page -74 -
To Next Page
Loading...
