Shanling M0 Pro - System navigation

SHANLING M0 PRO – ADVANCED USER MANUAL
Page 7
• LDAC-Connect (Auto) – Lowest bitrate and lowest sound quality, maintaining good
connection is prioritized.
Note 3: To learn more about using M0 PRO as Bluetooth receiver, visit M0 PRO as Bluetooth
receiver
SyncLink
Turn On/Off special feature that allows you to control M0 PRO from your Android phone.
How to use SyncLink
- Download Eddict Player app to your Android device.
- Pair M0 PRO and your Android device over Bluetooth.
- Open Eddict Player app on your Android device and go to SyncLink.
Brightness
Setting brightness of M0 PRO’s screen.
Can be set quickly in Quick Access Menu.
Screen off
Setting time since last touch, after which will display automatically turn off.
Lyrics mode: If you are viewing lyrics in Now Playing screen, screen will stay on.
Idle
Auto-Standby – After 1 minute of no usage and no playing music, M0 PRO will switch into
deep sleep standby mode to preserve battery. M0 PRO can be turned on instantly by single
press of volume wheel.
Auto-shutdown – After set time of no usage and no playing music, M0 PRO will turn off
completely.
Note: It’s possible to disable both setting, in which case M0 PRO will stay turned on until user
turns it off manually or until battery gets depleted.
Sleep Timer
M0 PRO will automatically turn off after set time. Even if music is playing and device is being
actively used. This setting reset after each use.