SHANLING M0 PRO – ADVANCED USER MANUAL
Page 9
Output options
• PO – Headphone output, volume of M0 PRO is controlled by volume wheel. Use this
setting when connecting headphones directly to M0 PRO.
• LO – Line output, volume of M0 PRO is set to maximum, volume wheel has no effect.
Use this setting when connecting other audio components with independent volume
control to M0 PRO, such as pre-amplifiers, active speakers and others.
There will be warning and confirmation window displayed before switching to Line output
mode.
Note: Always disconnect headphones or speakers from M0 PRO before switching to Line
output mode, to avoid any damage to hearing and equipment.
In-Vehicle mode
Turn On/Off special mode designed for use in car. M0 PRO will automatically turn on and off,
as you start up and shut down your car.
Note: In-Vehicle mode demands connected charging cable for proper functioning. Please
turn off In-Vehicle mode when using player in normal way.
- When M0 PRO detects charging, it will automatically turn on.
- When charging stops, M0 PRO will automatically turn off after 1 minute.
Theme
Swipe left and right to switch between different color themes.
Click on theme to switch to chosen theme.
To Next Page
Loading...
