SHANLING M0 PRO – ADVANCED USER MANUAL
Page 8
USB Mode
• USB Storage – To connect M0 PRO to computer to transfer files onto inserted Micro SD
card, Transferring music files to the card from computer
• USB DAC – To use M0 PRO as external soundcard with your computer, M0 PRO as USB
DAC/AMP
• USB AUDIO – Turn on if you are going to use M0 PRO as digital transport for any
external USB DAC.
Clock
Set time that will be displayed in status bar and on lock screen.
Lock screen
If enabled, user needs to unlock device every time screen is turned on.
To add additional lock screen images:
• Create “lockscreenimage” folder in root folder of Micro SD card.
• Copy in up to 5 images.
• All images must be PNG or JPG, resolution exactly 240 x 240, under 1MB
Volume lock
If enabled, volume wheel will be locked while screen is turned off.
Wheel shortcuts
Setting of functions assigned to quick double or triple press of volume wheel.
• Off
• Previous – Go to beginning of song / go to previous song
• Next – Go to next song
• Play / Pause
DSD Mode
Applicable only during playback of DSD audio files, affecting both native playback and M0 PRO
as USB Transport.
• D2P – DSD to PCM. File is played as PCM file.
• DOP – DSD over PCM. File is played as DSD file.
• Native – No conversion to PCM. File is played as DSD file.
USB Audio Output
Choose between fixed volume or variable volume of digital output. Variable USB volume is
needed for USB DAC dongles without hardware volume controls and for USB headphones.
To Next Page
Loading...
