SHANLING M0 PRO – ADVANCED USER MANUAL
Page 15
Note 3: Some external DACs demands advanced drivers, more power from USB port and other
special demands, which M0 PRO is not able to meet. Please test pairing of M0 PRO and DAC
before purchasing.
M0 PRO AS BLUETOOTH RECEIVER
M0 PRO can be paired with phone, tablet or computer to serve as Bluetooth receiver. In this
mode, all sounds from paired device will be streamed to M0 PRO, which will output it through
its headphone jack or USB output.
Bluetooth receiver function allows user to utilize high-quality sound of M0 PRO, while watching
videos or streaming music on their other device.
Pairing devices
1. On M0 PRO, turn on Bluetooth in Quick Access menu or System submenu.
2. Open Bluetooth settings on your other device and search for Bluetooth devices.
“Shanling M0 PRO” will appear. Click on it to starts pairing process.
3. On some systems, numerical code will be displayed on both M0 PRO and pairing device,
as security measure. Make sure numerical codes match and confirm them both on M0
PRO and pairing device.
4. M0 PRO will automatically switch into Bluetooth receiver mode. Screen will display
playback controls and icon of currently used Bluetooth codec. Used codec can be
changed only on other device, internal setting of M0 PRO has no effect in Bluetooth
receiver mode.
5. To turn off Bluetooth receiver mode, swipe right on M0 Pro.
Note 1: Volume can be changed both on M0 PRO and on paired device.
Note 2: In Bluetooth receiver mode, M0 PRO only support SBC, AAC and LDAC codecs.
PLAYLIST SUBMENU
New Playlist
Create new Playlist by click on the Plus icon.
Import playlist
Import externally created playlists into system. Playlists must be in .m3u format and placed
into special “_explaylist_data” folder on Micro SD card.
To Next Page
Loading...
