Bringing up the lower thread
Hold the upper thread with the left
hand. Turn the handwheet towards
you with your right hand until the
needle goes down and comes up
again to its highest position. (1)
-Lightly draw the needle thread
forming a loop with the bobbin
thread. The upper thread should
have caught the lower thread in a
loop.
-Putt the needle thread toward you
and the lower thread wilt come up
from the bobbin in a large loop. (2)
Putt about 15 cm. (6") of both thread
away from you under the presser
foot.
3O
To Next Page
Loading...
Need help?
General
