Stitch selection
Triple straight stitch: (1/3)
Pattern selector on " !U".
For hardwearing seams.
Turn the stitch length dial to "S".
The machine sews two stitches forwards and
one stitch backwards. This gives triple
reinforcement.
Triple zig-zag: (2/4)
Pattern selector on " _ ".
For hardwearing seams, hems and decorative
seams.
Turn the stitch length dial to "S".
Adjust the stitch width dial to between "3" and "5".
Triple zig-zag is suitable for firm fabrics like
denim, corduroy, etc.
66
To Next Page
Loading...
