Free motion darning
Set the machine as illustrated. Move the drop
feed control to right side to lower the feed dogs. (1)
Remove the presser foot clamp. (2)
Attach the darning foot to the presser foot bar.
The lever (A) should be behind the needle
clamp screw (B). Press the darning foot on
firmly from behind with your index finger and
tighten the screw (C). (3)
First sew round the edge of the hole (to secure the threads). (4)
First row: Always work from left to right. Turn work by 1/4 and
oversew.
A darning ring _s recommended for easier sewing and better
results.
J
,5
b ,,,r _
72
To Next Page
Loading...
Need help?
General
