Shark 7132L User Manual

Darning
- Turn stitch length dial to the desired length.
-Turn stitch selector to straight stitch, center
needle position.
-Position the fabric to be darned under the
presser foot together with the under laying
fabric to be used.
-Lower the presser foot and alternately sew
forward or reverse using the lever.
- Repeat this motion until the area to be darned
is filled with rows of stitching.
For reverse sewing instructions, see page 32.
76

Shark 7132L Specifications

General

Brand	Shark
Model	7132L
Category	Sewing Machine
Language	English