Shark 7132L - Buttonhole Balance Adjustment

Left and right side balance for buttonhole
" Stitch density on right and left
sides of buttonhole can be
D_(_ adjusted by buttonhole balance
control dial.
This diat should usually be in a
neutral position. (between "+"
and "-")
If the stitches on the left side of
the buttonhole are too close
together, turn the dial to the left
(+).
* Turning dial to the left opens
_ left side.
If the stitches on the left side of
the buttonhole are too open,
turn the dial to the right (-).
_ * Turning dial to the right closes
_ _../"_:::_ _ taft side.
The stitch on the right side of
the buttonhole is set using the
stitch length dial.
58