sharkclean.comsharkclean.com
ABOUT THE SHARK ION ROBOT® ABOUT THE SHARK ION ROBOT®
Dock
!
Spot Max
Dock Button
Front Bumper
Charge Indicator Lights
Error Indicator Light Wi-Fi Indicator Light
Dust Bin Release Button
Clean Button
Max Button
Power Button
CORDS AND OBSTRUCTIONS LOW-CLEARANCE FURNITURE
RETURNING TO DOCK
Robot Traps Robot Friendly
Side Brush
Cli Sensors
Side Cli
Sensor
Side Brush Post
Battery Door
Multi-Surface
Brushroll
Drive Wheel
Robot Dust Bin
and Filter
Front Caster
Wheel
Charging Contact
With Auto-Sense™ Navigation, your robot uses an array of sensors to navigate around walls, furniture legs, and
other obstacles while it cleans. The robot may gently bump into obstructions or linger in one spot, and it may
not cover every area in a single cleaning. For best results, prepare your home as indicated below,
and schedule a daily cleaning to ensure all floor areas are regularly maintained.
Before cleaning, clear away cords and other
obstructions or block o the areas you don't want
your robot to travel to.
To prevent your robot from becoming trapped,
use furniture risers.
4-inch
Min.
Clean
!
Spot Max
STAIRS WITH CARPET RUNNER
For your robot’s cli sensors to work properly,
all runners, rugs, or carpets must be at least
4 inches from any stairs (or extend over the edge
of the stairs).
If a runner, rug, or carpet edge is less than
4 inches from the stairs and can’t be moved,
use a BotBoundary® strip to block o the stairs.
BotBoundary strips are available for purchase at
sharkaccessories.com
If your robot roams too far, it could have trouble
finding the Charging Dock.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
