sharkclean.comsharkclean.com
USING THE SHARK IQ ROBOT™ USING THE SHARK IQ ROBOT™
IQ NAV™
RUMPELSTILTSKIN
Schedule History
EDIT OPTIONS
MapsControl
Shark
Kitchen
Living Room
Dining Room
As it cleans, your robot will create a map of your
home. It may take several cleanings for the robot to
finish its mapping. Once mapping is complete, an
Interactive Map of your floor plan will be available
on the app.
PREP YOUR HOME
MANUAL CLEANING MODE
To manually start a cleaning cycle, press the Clean button on the robot or on the
mobile app. To stop the robot before it finishes cleaning and automatically returns to
the base, press the button again.
IMPORTANT: Before cleaning an entire room for the first time, we recommend that you first test your robot on a small
section of the floor to ensure there is no scratching.
NOTE: scheduling can only be done in the app.
With IQ NAV™, your robot uses an array of sensors to navigate around walls, furniture legs, and other
obstacles while it cleans. The robot may gently bump into obstructions while cleaning.
For best results, prepare your home as indicated below, and schedule a daily cleaning to ensure all floor
areas are regularly maintained.
Robot Traps Robot Friendly
OBSTRUCTIONS
Before cleaning, clear away
cords and other obstructions.
THRESHOLDS
Your robot may have some
trouble clearing some high
thresholds. Block o high
thresholds with the included
BotBoundary strips.
STAIRS
Your robot's cli sensors will
prevent it from falling o
ledges. For your robot’s cli
sensors to work properly,
all runners, rugs, or carpets
must be at least 4 inches
from any stairs (or extend
over the edge of the stairs.)
WARNING: Do not put BotBoundary strips near any stairs
or clis.
NOTE: Be sure to charge the robot completely before its first cleaning so that it can explore, map, and clean as much of
your home as possible. It may take up to 5 hours to fully charge your robot.
NOTE: Avoid picking up or moving the robot or base. If either are relocated, the robot may not be able to follow its
intelligent cleaning path, or find its way back to the base. If the robot is picked up or moved for any reason, it should be
returned to within 6 inches of its last location.
Interactive Map
The interactive map in the app allows you to name
rooms, then select which rooms to clean, and send
the robot to clean one specific location.
As cleanings continue, the robot will update and
refine its path to provide optimized cleaning coverage.
After each cleaning, an updated map and a
cleaning report will be available in the app.
To Next Page
Loading...
Need help?
General
