EasyManuals Logo

Shark IQ Robot RV1000 Series User Manual

Shark IQ Robot RV1000 Series
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
sharkclean.comsharkclean.com
MAINTENANCE
EMPTYING THE DUST BIN
Press the Dust Bin Release Tab and slide out the
dust bin.
CAUTION: Turn o power before performing any maintenance.
Please visit sharkkclean.com/app or call 1-800-798-7398 for all of your app questions.
To avoid spills, be sure to hold the dust bin in an
upright position. Use the finger slots to open the lid.
Empty debris and dust into trash.
USING THE SHARK IQ ROBOT™
WI-FI TROUBLESHOOTING
To use the app, your phone must be connected
to a 2.4GHz network. The app will only work on a
2.4GHz network.
Typical home Wi-Fi networks support both 2.4GHz
and 5GHz. Make sure to enter your user name and
password when connected to a 2.4GHz network.
Do not use a VPN or a proxy server.
Make sure Wi-Fi isolation is turned o on the
router.
If you cannot connect, contact your internet
service provider.
ERROR CODE PROBLEM
! (RED) + Wi-Fi indicator (RED Flashing) Wrong password for Wi-Fi
! (Flashing red) + Wi-Fi (RED) SSID cannot be found, try connecting again
! + Wi-Fi (Flashing RED alternately) Wrong user name or password for your Shark account
! + Wi-Fi (Flashing RED at the same time) Cannot connect to Wi-Fi
USING THE SHARK CLEAN™ APP AND VOICE CONTROLS
Search for Shark Clean in the app store and download the app to your iPhone
TM
or Android
TM
.
Schedule
Select days and times for cleaning
Control
Select specific rooms for cleaning, in whatever
order you choose
• Select cleaning modes: Normal, Max and Quiet.
The app will also provide you access to:
• Tips, Tricks, and FAQs
• Tech Support
• Troubleshooting
Maps
Choose names for rooms
Set cleaning priorities
History
View a summary of each cleaning
Generate detailed reports of cleaning data
SETTING UP VOICE CONTROL WITH THE GOOGLE ASSISTANT OR AMAZON ALEXA
Visit sharkclean.com/app for setup instructions which include how to enable Shark Skill for Amazon Alexa
and using with Google Assistant.
VOICE CONTROL COMMANDS FOR THE GOOGLE ASSISTANT OR AMAZON ALEXA:
Google Assistant:
“OK Google, tell Shark to start cleaning.”
“OK Google, tell Shark to pause my robot.”
OK Google, tell Shark to send my robot to
the dock.”
Amazon Alexa:
Alexa, tell Shark to start cleaning.”
Alexa, tell Shark to pause my robot.”
Alexa, tell Shark to send my robot to
the dock.”
NOTE: Make sure dust cup clicks into place to ensure dust cup is fully inserted.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shark IQ Robot RV1000 Series and is the answer not in the manual?

Shark IQ Robot RV1000 Series Specifications

General IconGeneral
Self-Empty BaseYes
Wi-Fi ConnectivityYes
Recharge and ResumeYes
Filter TypeHEPA
Brushroll TypeSelf-Cleaning Brushroll
BaglessYes
Cliff SensorsYes
Battery TypeLithium-Ion
TypeRobot Vacuum
Voice ControlYes (Alexa, Google Assistant)
App ControlYes
Cleaning ModesMax

Related product manuals