sharkclean.comsharkclean.com
ASSEMBLY
1. Insert Wand into Floor Nozzle.
2. Insert Handheld Vacuum into wand.
For proper operation, ensure all components are completely connected and clicked into place.
LI-ION BATTERY
Prior to first use, charge completely. A full charge takes approximately 3 hours..
Visit sharkclean.com/support online or review the included Quick Start Guide.
Your vacuum comes equipped with either a standard wand or a MultiFLEX® wand and either a standard floor
nozzle or a Dirt Engage™ floor nozzle. All versions assemble the same way.
When the Shark Li-Ion battery needs to be replaced, dispose of it or recycle it in accordance with local
ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a
municipal solid waste stream. Return spent batteries to an authorized recycling center or to the retailer for
recycling. Contact your local recycling center for information on where to drop o the spentbattery.
MultiFLEX
Wand
Handheld
Vacuum
Dirt Engage
Floor Nozzle
Standard
Wand
Handheld
Vacuum
Standard
Floor Nozzle
RECYCLING THE LI-ION BATTERY
LED BATTERY POWER AND CHARGING INDICATORS
NOTE: The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of
a new battery.
NOTE: Your vacuum’s model and serial numbers can be found on the QR code label on the bottom of the back of the
handheld vacuum.
RUNTIMES PER FULLY-CHARGED BATTERY
OR
OR
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE: Full charge takes approximately 3 hours.
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
1.
2.
1.
2.
To Next Page
Loading...
Need help?
General
