Sharp AL-2040CS

AL-2040CS DISASSEMBLY AND ASSEMBLY 8 - 11
18) Remove each pawl, and remove the paper exit tray.
19) Remove two screws and remove the fusing connector.
20) Remove five screws and the connector, and lift the intermedi-
ate frame unit to remove.
21) Remove the screw and the E-ring, and remove the PS semi-
circular earth plate and the PS roller unit.
22) Remove the E-ring and remove the spring clutch from the PS
roller unit.
23) Remove three screws and remove the TC front paper guide.
2)
1)
3)
2)
2)
3)
4)
1)
5)
4)
4)
1)
2)
3)
PS roller unit
PS semi-circuler
earth plate
5)
4)
4)
1)
2)
3)
PS roller unit
PS semi-circular
earth plate
1)
2)