Sharp AL2020 Service Manual

AL-2020/2035/2040/2050/2060 SPECIFICATIONS 2 - 6
Send functions Document scan
function
Scan density
select function
Density select Light/Medium/Dark
Scan resolution
select function
Selectable image
quality mode
Scan density
Resolution select Standard: 8dot x 3.85 line/mm
Fine: 8dot x 7.7 line/mm
Super Fine: 8dot x 15.4 line/mm
Half-tone: Scan in 256 gradations
Document table
scan (OC send)
function
Book document scan/send function from the document
table (OC). In one send job, the send document size is
fixed.
Send document
information
adding function
Sender
registration/send
function
Sender telephone
number
20 digits
Sender registration
name
36 characters
Send header
function
Header display content Sender number registered in sender registration/ Sender
name/ Send date and time/ page
Page counter
function
Adding position Top right (The right edge)
Adding form P. XXX (Max. 999)
Cover adding
function
Display items • Date and time
• Destination name (Max. 20 characters)
• Destination number (Max. 40 digits)
• Sender name (Max. 20 characters)
• Sender number (Max. 20 digits)
• Send quantity (3 digits)
• Send message (When send message adding function
is used)
Send message
adding function
Fixed message NO MESSAGE/CONFIDENTIAL/PLS. DISTRIBUTE/
URGENT/PLS. CALL BACK/IMPORTANT
Index function Yes (Max. 10 kinds in printable area)
Basic send
functions
Direct send
function
Ye s
Memory send
function
Send form
Number of items of
send reservation
• Send reservation
• Time specifying send
• Group send
• Serial broadcast
Max. 52 items (excluding redial)
Group send and broadcast are treated as one item.
Operation when
memory full
• Document scan stop
• Memory full display → Job continuation check
• Job continuation: Scanned document data are sent.
• Job stop: Scanned document data are deleted.
• In either case, document is held in SPF and not
discharged.
Quick online send
function
Valid when memory mode is ON. Scan of send document
data and send are performed together.
Auto resend
function
When busy tone
detected
Redial is performed according to the setting of "Number/
interval of redial when busy."
When no response
(CED/ FSK signal are
not detected)
Redial is performed according to the setting of "Number/
interval of resend in communication error."
Communication error
Long document
send function
Supports up to 500mm. When this length is exceeded,
"PAPER JAM" occurs.
Large item Middle item Small item Sub item Specifications

Sharp AL2020 Specifications

General

Brand	Sharp
Model	AL2020
Category	All in One Printer
Language	English