Loading Paper
26
Loading Paper
You can load approximately 250 sheets of A4 paper (max. 80 g/m
2
) in the
paper tray.
Caution!
Do not use the blank side of paper that has already been printed on.
1 Remove the output tray.
2 Insert a stack of paper into the tray,
print side up.
• Important! The stack of paper must not
be higher than the paper height line on
the paper tray.
3 Squeeze the sides of the paper guide
as shown and slide it to the slot for the
length of the paper you are loading
(A4).
Paper height line
To Next Page
Loading...
