Permanent Copy Settings
62
Permanent Copy Settings
The following copy settings remain in effect until they are changed. These
settings do not revert to the default settings when the auto clear time elapses
or when is pressed.
Default copy quality setting
The default quality setting (page 59) is “TEXT” (this is the setting that is used
if you do not make a selection). If desired, you can change the default quality
setting to “PHOTO”.
1 Press and then or
until the display at right appears.
2 Press .
3 Select the default quality setting:
TEXT: PHOTO:
4 Press repeatedly to exit.
MENU
Z
A
The display briefly shows
your selection, then:
1: TEXT
Display:
COPY SETTING
2: COPY RESO.
To Next Page
Loading...
Need help?
General
