44
Useful adjustment settings
Audio Out
Allows you to select what controls the audio output.
NOTE
• This setting is available only in TV input mode.
Press MENU and the MENU screen displays.
1
2
Press a/b to select “Audio Out”, and then
press ENTER.
3
Press c/d to select “Fixed” or “Variable”,
and then press ENTER.
4
Description
• Sound via speakers is adjusted with VOLl/
k on the remote control unit or the TV.
• Sound via the MONITOR OUTPUT terminal
is not adjustable and constantly outputs.
• Sound via the MONITOR OUTPUT terminal
is adjusted with VOLl/k on the remote
control unit or the TV.
• Sound via speakers is muted.
Selected item
Fixed
Variable
Press c/d to select “Option”.
VariableFixed
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
0 hr. 30 min. 1 hr. 00 min. 1 hr. 30 min.
2 hr. 30 min. 2 hr. 00 min.
Off
Each time you press SLEEP, the remaining
time switches as shown below.
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
1
2
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
LC-32_37GA4X(E)-h 04.9.17, 7:53 AM44
To Next Page
Loading...
