Sharp AQUOS LC-42A65M

21
Watching TV
Manual setting for each channel (continued)
Search tuning
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Search”, and then press
ENTER.
1
2
MENU
[
Setup
...
Programme Setup
]
Fine
Colour System
Skip
Lock
Search
Channel frequency settings
179.25 MHz
Next
Store
Cancel
Sound System
Label
[Auto]
[Off]
[Off]
[B/G]
[SAT.1]
Press a/b to select item and press ENTER.
• Next: Search the next channel.
• Store: Memorise the current display channel.
• Cancel: Return to the previous screen.
(The search result will not be stored.)
3
Fine tuning
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
1
Press a/b to select “Fine”, and then press
ENTER.
2
Press c/d to adjust the frequency, and then
press ENTER.
• Adjust while checking the background picture as
a reference.
3
Fine
Colour System
Sound System
Search
Channel frequency settings
179.25 MHz
Skip
Lock
Label
[Auto]
[Off]
[Off]
[B/G]
[SAT.1]
• Instead of the method above, you can also set
by directly entering the frequency number of the
channel with 0 — 9.
• When setting a frequency on the “Fine” screen,
the last fi gure of the frequency needs to be “0” or
“5”.
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s ENTER.
Sound System (Broadcasting system)
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
Press a/b to select “Sound System”, and
then press ENTER.
• Receivable sound systems (Broadcasting
systems) are listed.
1
2
Fine
Colour System
Sound System
Search
B/G
D/K
I
M
Sound system settings
Skip
Lock
Label
[Auto]
[Off]
[Off]
[B/G]
[SAT.1]
Press a/b to select the optimum sound
system, and then press ENTER.
3
Sound system menu
Press a/b to select the optimum colour
system, and then press ENTER.
3
Fine
Colour System
Sound System
Search
Auto
PAL
SECAM
NTSC 3.58
PAL-60
NTSC 4.43
Colour system settings
Skip
Lock
Label
[Auto]
[Off]
[Off]
[B/G]
[SAT.1]
Colour System
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
1
Press a/b to select “Colour System” and
then press ENTER.
• Receivable colour systems are listed.
2
Colour system menu
NOTE
• Check the sound system if the sound output were not
correct.
42A65M_en_c.indd 2142A65M_en_c.indd 21 8/6/08 2:11:19 PM8/6/08 2:11:19 PM