Sharp AQUOS LC-42A65M

36
Audio adjustment
You can adjust the audio of the selected AV mode.
Press
c
/
d
to select “Audio”.
2
Press MENU and the MENU screen displays.
1
Watching TV
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
c/d to select “Yes”, and then press ENTER.
Press
a
/
b
to select the desired menu item.
Press ENTER to proceed if necessary.
3
Press
c
/
d
to select the desired item or adjust
the item to the desired level. Press ENTER if
necessary.
4
Selected item
c
button
dbutton
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio from
the right speaker
Decrease audio
from the left speaker
Press
c
/
d
to select “Option”.
Press MENU and the MENU screen displays.
1
2
Press
c
/
d
to select “Fixed” or “Variable”, and
then press ENTER.
Press
a
/
b
to select “Output Volume Select”,
and then press ENTER.
3
4
H SRS TruSurround (TS) XT
You can enjoy SRS TruSurround XT sound, the same
as if you were in a movie theatre.
Using SURROUND on the remote control unit
Press SURROUND to switch the SRS TS XT function
on or off.
Using SRS TS XT on the menu screen
You can produce SRS TruSurround XT effects from
the “Audio” setting.
Selected item Description
On SRS TruSuround XT creates a high
quality surround sound experience, when
watching DVD movies and TV programmes
broadcast in surround sound.
Off Outputs the normal sound.
Output Volume Select
Allows you to select what controls the audio output.
NOTE
• The “Audio” menu cannot be operated when headphones
are plugged in or when “Variable” is selected.
Selected item Description
Fixed • Sound via speakers is adjusted with VOL
e
/
f
on the remote control unit or the
TV.
• Sound via the MONITOR OUT terminal is
not adjustable and constantly outputs.
Variable • Sound via the MONITOR OUT terminal is
adjusted with VOL
e
/
f
on the remote
control unit or the TV.
• Sound via speakers is muted.
H Bass Enhancer
This function allows you to enjoy bass-enhanced
sound.
Selected item Description
On Bass Enhancer function is on.
Off Outputs the normal sound.
Press a/b to select “Bass Enhancer”, and
then press ENTER.
Repeat steps 1 to 2 in Audio Adjustment.
1
2
Press c/d to select “On”, and then press
ENTER.
3
Audio
Treble
Bass
Balance
SRS TS XT
Bass Enhancer
Reset
[ 0] –15
[0]L
[ 0] –15
STANDARD
Power Control
[Off]
[On]
+15
+15
R
Fixed
Variable
Audio output terminal setting
42A65M_en_f.indd 3642A65M_en_f.indd 36 8/5/08 11:23:28 AM8/5/08 11:23:28 AM