44
Open the remote control unit’s fl ip cover,
press OPTION and the AQUOS LINK menu
screen displays.
1
Press a/b to select “Media change”, and then
press ENTER.
2
Selecting media type for CEC-compatible
recorder
If your recorder has multiple storage media, select the
media type here.
Select the desired medium, such as DVD or
HDD. The media type changes every time you
press ENTER.
3
AQUOS LINK
Open the remote control unit’s fl ip cover,
press OPTION and the AQUOS LINK menu
screen displays.
1
Press a/b to select “Model select”, and then
press ENTER. The HDMI device changes
every time you press ENTER.
2
HDMI device selection
If multiple HDMI devices are connected in a daisy chain,
you can specify which device to control here.
Open the remote control unit’s fl ip cover,
press OPTION and the AQUOS LINK menu
screen displays.
1
Press a/b to select “Recorder EPG”, and then
press ENTER.
• The external input source switches and the
recorder’s EPG is displayed.
2
Recording via the CEC-compatible
recorder’s EPG (only for recorders)
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
Select the programme to record.
• You can use a/b/c/d, RETURN, EXIT and
coloured buttons.
3
Recorder EPG
Top Menu/Title List
Media change
By AQUOS Audio SP
By AQUOS SP
Setup Menu
Model select
AQUOS LINK Menu
Sound mode change
Recorder EPG
Top Menu/Title List
Media change
By AQUOS Audio SP
By AQUOS SP
Setup Menu
Model select
AQUOS LINK Menu
Sound mode change
NOTE
• Refer to the operation manual of the recorder for details.
42A65M_en_f.indd 4442A65M_en_f.indd 44 8/6/08 3:45:48 PM8/6/08 3:45:48 PM
To Next Page
Loading...
