41
AQUOS LINK connection
First connect the AQUOS LINK-compatible audio system or an AQUOS BD Player that supports the HDMI CEC
protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device’s power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
AQUOS LINK
Connecting an AQUOS BD Player via the AQUOS LINK-
compatible audio system
Connecting an AQUOS BD
Player only
Optical fi bre
cable
HDMI-certifi ed cable
HDMI-certifi ed cable
HDMI-certifi ed cable
AQUOS BD Player AQUOS LINK-compatible
audio system
AQUOS BD Player
AQUOS LINK Setup
Press MENU and the MENU screen displays.
1
Press c/d to select “Option”.
2
Press a/b to select “AQUOS LINK Setup”,
and then press ENTER.
3
AQUOS LINK Auto power on
If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Press a/b to select “Auto Power On”, and
then press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
5
Press MENU to exit.
6
NOTE
• The factory default for this item is “Off”.
Auto Power On
Selecting Recorder
On
O
Setting auto power on by AQUOS LINK
42A65M_en_f.indd 4142A65M_en_f.indd 41 8/8/08 12:08:34 PM8/8/08 12:08:34 PM
To Next Page
Loading...
