Sharp AQUOS wish - 10.2 Change Basic Settings

74 75
Chapter 10: Managing Your Device
10.2 Change Basic Settings
Date and Time
To automatically set the date and time
1. Tap Home screen/Apps screen > or Quick
settings panel > .
2. Tap System > Date & time.
3. Tap Use network-provided time to enable
automatically set the date and time according to
the network.
NOTE: To manually set the date and time, tap the
enable/disable slider.
To manually set the date and time
1. Tap Home screen/Apps screen > or Quick settings panel > .
2. Tap System > Date & time.
3. Disable Use network-provided time.
4. Do the following:
• Tap Date and select the date from the
calendar. Then tap OK to save the setting.
• Tap Time and rotate the hour/minute slider to
set the correct time. Then tap OK to save the
setting.
NOTE: To manually set the time, tap
and
enter the time (hour/minute).