33
STATUS
INDICATORS
MISFEED REMOVAL
Misfeed removal
3
Close the side cover by pressing the handle on the
cover.
●
The misfeed ( ) indicator will go out.
Misfeed in the upper paper tray
Before opening the upper paper tray, be sure to open the bypass tray, lift
slightly on the side cover and slide the cover out until it stops, and then
perform steps 1 to 3 described in the “A. Misfeed in the paper feed area”
section.
1
Gently lift and pull out the upper paper tray and remove
the misfed paper.
2
Close the paper tray.
3
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
●
The misfeed ( ) indicator will go out.
p28-p35_206.p65 7/12/00, 12:0533
To Next Page
Loading...
