20
MAKING COPIES
TWO-SIDED COPYING
Automatic two-sided copying can be performed with this model. If an
optional single pass feeder (SPF) or reversing single pass feeder (RSPF) is
installed, two-sided copies can be automatically made from one-sided
originals ( ). With the optional reversing single pass feeder (RSPF)
installed, then two-sided copies can be made from two-sided originals
( ), and also two single-sided copies can be made from one two-sided
original ( ). See page 59.
Two-sided copying
1
Place the first original face down on the original table
and close the platen cover.
2
Press the ORIGINAL TO COPY key to select one-sided to
two-sided copying.
3
Ensure that the desired paper tray is selected.
●
Paper sizes that can be used in the duplex mode are A5, A4, A4R, B4
and A3.
●
The bypass tray cannot be used in the duplex copy mode.
4
Press the START key.
●
The one-sided to two-sided indicator will blink.
●
The copy will not be output until both sides have been scanned.
p13-p27_206.p65 7/12/00, 12:0520
To Next Page
Loading...
