Sharp AR-206

57
OPTIONAL EQUIPMENT
SINGLE PASS FEEDER
(
AR-SP2
)
REVERSING SINGLE PASS FEEDER
(
AR-RP1
)
The single pass feeder (SPF) and the reversing single pass feeder (RSPF)
hold up to 30 originals for automatic feeding.
If the RSPF is installed, two-sided originals can be copied automatically
without having to manually turn them over.
PART NAMES
Specifications
Document feeder tray Feeding roller cover
Right side cover
Original guides
Exit area
Document feeder tray Feeding roller cover
Original guides
Exit area
AR-SP2
AR-RP1
Reversing tray
As a part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
Acceptable Weight: 56 to 90 g/m
2
originals Size: A5 to A3
Capacity: Up to 30 sheets provided the total aggregate
thickness does not exceed 4 mm
Power supply Drawn from the copier
Detectable original A5, A4, A4R, B4, A3
sizes
Weight SPF: Approx. 5.3 kg
RSPF: Approx. 5.5 kg
Dimensions 583 mm (W) x 435 mm (D) x 131 mm (H)
p55-p74_206.p65 7/12/00, 12:0557