Sharp AR-206

62
OPTIONAL EQUIPMENT
1
Press and hold down the ORIGINAL TO COPY key for
approximately 5 seconds until the indicator will
blink and the currently selected parameter number will
blink in the copy quantity display.
2
Select the desired parameter using the numeric keys.
●
0: OFF 1: ON
The factory default setting is 0.
3
Press the START key.
●
The selected parameter will be steadily lit.
4
Press the ORIGINAL TO COPY key.
●
The indicator will stop blinking.
The image rotation in duplex copying can be also set
using user program No. 20. See page 36.
Setting image rotation in duplex copying
SINGLE PASS FEEDER
(
AR-SP2
)/REVERSING SINGLE PASS FEEDER (AR-RP1)
Single pass feeder (AR-SP2)
Reversing single pass feeder (AR-RP1)
p55-p74_206.p65 7/12/00, 12:0662