Sharp AR-287

7-25
CHAPTER7
5
Set the number of copies.
●
If 8-1/2" x 11" paper is not selected, press the “PAPER SELECT”
key and select a paper tray containing 8-1/2" x 11" paper.
6
Press the START key.
7
Replace the finished original with the next original
after the START key indicator lights up, and then press
the START key. Repeat this step until all originals have
been scanned.
8
After all originals are scanned, press the “READ-END”
key on the touch panel.
●
Copying will start and each set of copies will be automatically
stapled and delivered to the offset tray.
1
2 3
4 5 6
7
8
9
0
C
P
CLEAR
PROGRAM AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO 8/ 11
1
2
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
FINISHER (AR-FN2)