7-33
CHAPTER7
3
Push the large capacity tray toward the copier and latch
it into place.
4
If misfed paper is not found in step 2, pull the tray out.
●
When pulling the large capacity tray out, be sure to pull it out after
the paper tray control button lamp goes out.
5
Remove the misfed paper.
6
Gently push the tray back into place.
●
Confirm that the misfeed display is cleared.
OPTIONAL EQUIPMENT
Large capacity tray (AR-LC1N)
LARGE CAPACITY TRAY (AR-LC1N)
To Next Page
