Sharp AR-287

2-10
CHAPTER2
4
Press the key on the touch panel.
5
Press the “OK” key.
6
Use the 10-key pad to enter the desired number of
copies.
●
The number will be shown in the copy quantity display.
●
Use the CLEAR (
C
) key to cancel an entry if a mistake is made.
7
Press the START key.
●
The original will be scanned each time the START key is
pressed, but copying will not begin yet.
8
Remove the first original and replace it with the next
original after the START key indicator lights up, and
then press the START key.
●
Copy from the last page to the first page.
9
Repeat step 8 until all originals have been scanned.
Then, press the “READ-END” key on the touch panel.
●
Copying will start after the “READ-END” key is pressed.
Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of
originals larger than 8-1/2" x 11" can be scanned.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key.
MAKING COPIES Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
1
2 3
4 5 6
7
8
9
0
P
PROGRAM AUDIT CLEAR
INT
CA
CLEAR ALL
START
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO 8/ 11
1
2
3
READY TO COPY.
2-SIDED COPY
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11
1
2
READY TO COPY.
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
OK
AUTO 8/ 11
1
2
2-SIDED COPY