10
CONNECTING TO A COMPUTER
Follow the procedure below to connect the machine to your computer.
Interface cables for connecting the machine to your computer are not included with the machine.
Please purchase the appropriate cable for your computer.
Interface cable
USB cable
Shielded twisted pair cable, high-speed transmission equivalent (9 feet (3 m) max.)
If the machine will be connected using a USB 2.0 interface, please purchase a USB cable that
supports USB 2.0.
Parallel cable
IEEE 1284-Shielded type bi-directional parallel interface cable (9 feet (3 m) max.)
CONNECTING A USB CABLE
1
Insert the cable into the USB port on
the machine.
2
Insert the other end of the cable into
your computer's USB port.
CONNECTING A PARALLEL CABLE
1
Ensure that your computer and the
machine are turned off.
2
Insert the cable into the parallel port on
the machine and fasten with the clasps.
3
Insert the other end of the cable into
your computer's parallel port.
•
USB is available on a PC/AT compatible computer that was originally equipped with USB and had
Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP
Home Edition preinstalled.
• Do not connect the interface cable before installing the printer driver. The interface cable must be
connected during installation of the printer driver.
Caution
The cable can also be inserted into a
USB 1.1 port. However, performance
will be the same as USB 1.1.
Note
!!install_ar230270.book 10 ページ ２００３年７月１０日 木曜日 午後１１時１５分
To Next Page
Loading...
