Sharp AR-M237 - Editing and Deleting Programs

74
PROGRAMMING
5
Your settings are displayed. Make
sure that they are correct.
6
If you are finished storing programs,
touch the [EXIT] key.
If you wish to store another program,
touch the [NEXT] key.
If you touch the [EXIT] key, you will return to the
screen of step 4 on page 66.
If you touch the [NEXT] key, you will return to the
screen of step 1.
EDITING AND DELETING PROGRAMS
If you need to edit or delete a previously stored program, perform steps 1 through 3 on pages 65 and 66 and then
perform the following procedure:
1
Touch the [AMEND/DELETE] key.
2
Touch the [PROGRAM] key.
3
Touch the program that you wish to
edit or delete.
• When you touch the program name, the edit/delete
screen for the selected program appears.
• Touching the [ADDRESS BOOK] key returns you to
the screen of step 2.
4
To edit the program, follow the same
procedure as for storing the program.
To delete the program, touch the
[DELETE] key and then touch the
[YES] key in the confirmation screen
that appears.
PROGRAM
PROGRAM NAME
SETTINGS
ADDRESS 2 ADDRESSES
STANDARD
REGISTRATION IS COMPLETED.
PROGRAM FOR SHARP
RESOLUTION EXPOSURE AUTO
SPECIAL
MODES
POLLING
No.1
NEXT EXIT
AMEND/DELETE
EXIT
1/1
PROGRAM
RELAY GROUP
DIRECT ADDRESS / AMEND/DELETE
PROGRAM
SELECT ADDRESS TO AMEND/DELETE.
EXIT
PROGRAM FOR SHARP EMAIL NEWS GROUP
ABYS FAX FOREMAT A
ADDRESS
BOOK
RELAY GROUP
DIRECT ADDRESS / AMEND/DELETE
PROGRAM NAME
SETTINGS
REGISTRATION IS
PROGRAM FOR SHARP
AUTOEXPOSURESTANDARDRESOLUTION
2 ADDRESSESADDRESS
POLLING
SPECIAL
MODES
No.1
DELETE EXIT