50
ADVANCED TRANSMISSION METHODS
USING THE RELAY REQUEST FUNCTION
A relay request transmission is performed by specifying the relay group and then performing a regular fax
transmission.
Only one relay group can be specified.
A relay request will be refused if an end receiving machine is specified that is not stored in the relay machine.
1
Touch the [SPECIAL MODES] key , the
key, and then the [SENDING
OPTIONS] key.
If the address book
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
2
Touch the [RELAY BROADCAST] key.
3
Touch the key of the relay group that
you wish to use.
The selected relay group
key is highlighted.
4
Touch the inner [OK] key.
You will return to the
special transmission
screen.
The [RELAY
BROADCAST] key is
highlighted and a relay
request icon appears.
5
Touch the outer [OK] key.
You will return to the condition settings screen.
6
Perform the fax transmission. (p.12)
SENDING
OPTIONS
COVER SHEET
SPECIAL MODES
SUB ADDRESS
ADDRESS REVIEW
SPECIAL MODES
DIRECT TX MEMORY TX
G OPTIONS / RELAY BROADCAST
SHARP GROUP
SHARP CORPORATION
To Next Page
Loading...
