64
FAXING A DOCUMENT FROM A
COMPUTER (PC-FAX)
If a computer is connected to the machine and the PC-FAX driver installed in the computer, a document created on
the computer can be sent directly to a fax machine. There is no need to print the document and then scan it on the
machine.
USING PC-FAX TRANSMISSION
To fax a document using the PC-FAX function, use the same procedure as when you print the document from the
application. First switch to the installed PC-FAX driver and then execute printing. Image data for fax transmission will
be generated and the image sent as a fax.
For more information on using the PC-FAX function, see the "Operation manual" that is installed along with the
PC-FAX driver. To open the manual, click the Windows Start button, select "All Programs" ("Programs" in operating
systems other than Windows XP), "SHARP PC-FAX Driver", and then "Operation manual".
• This function can only be used for transmission. Faxes sent to the machine cannot be received by the
computer.
• After sending a fax from your computer, check with the recipient to see if the fax was received. You can also
check the result of transmission on a Activity report. (p.85)
• Regardless of the fax settings, this function only rotates 8-1/2" x 11" (A4) length (11" x 17" (A3) width) originals
before transmission.
• Originals less than 8-1/2" x 11" (A4) width are transmitted as 8-1/2" x 11" (A4) width documents.
• This function can only be used in a Windows environment.
Note
Select the PC-FAX driver and
follow the same procedure as
when printing the document.
Your machine The other machine
Transmission
to the receiving
fax machine.
The computer
cannot be used
to receive faxes.
To Next Page
Loading...
