95
KEY OPERATOR PROGRAMS
8
KEYS USED IN KEY OPERATOR PROGRAMS
Example: Auditing mode
When a checkbox ( ) appears in front of a setting, a checkmark ( ) will appear when the checkbox is touched.
This indicates that the setting is enabled. If a checkbox with a checkmark ( ) is touched, the checkmark is
cleared ( ) and the setting is disabled.
When a key that appears in the form is touched, the setting screen of that key will appear.
If the settings continue on the following screen(s), touch the and keys to move back and forth through the
screens. To return to the category selection screen, touch the [OK] key.
The currently set numerical value is displayed.
Numerical values can be set by touching the and keys.
20
(1 999)
1
2
3
4 5
OK
RESETTING ACCOUNT
TOTAL PAGES PER ACCOUNT
AUDITING MODE
ACCOUNT CONTROL
KEY OPERATOR PROGRAMS
1/3
The following keys appear in screens that
require the entry of numerical values.
1
2
X X X
3
4
5
To Next Page
Loading...
