Sharp AR-M276

AR-M236/M276/M237/M277 SIMULATION 8 - 30
Operation/procedure
1. Touch the item to be set.
2. Enter the set value with the 10-key.
To support an individual necessity in paper and the environment, it is
variable in the range of 5 to 30uA in the increment of 1uA in each
mode.
When changing +V2, check with +V1 unchanged. If there is any trouble
in the half tone image of graphics, keep the relationship between +V1
and +V2 at the default and change it.
When the image quality is deteriorated because the user selects the
OHP mode and use other than the recommended OHP, decrease the
transfer current to adjust deterioration of black background picture
quality. If some of characters are not printed, increase the transfer cur-
rent.
This setting is changed in linkage with SIM 26-6 destination setting.
*1: SECL/SCA/SEF/EX inch series/EX AB series/EX inch series (FC)/
EX AB series (FC)/China/Taiwan/SEEG2
*2: SEC/SEEG/SUK
44-34
Purpose Setting
Function
(Purpose)
Used to set the transfer current value in each mode.
Item Content
Setting
range
Default
*1 *2
1 +V1F (600) 600dpi normal paper > B5R
+ V1 single surface. Duplex
(Front)
5-30 5 5
2 +V1R (600) 600dpi normal paper > B5R
+ V1 Duplex (Back)
5-30 5 5
3 +V2F (600) 600dpi normal paper > B5R
+V2 single surface. Duplex
(Front)
5-30 18 20
4 +V2R (600) 600dpi normal paper > B5R
+V2 Duplex (Back)
5-30 14 18
5 +V1S-F (600) 600dpi normal paper ≤ B5R
+V1 single surface. Duplex
(Front)
5-30 5 5
6 +V1S-R (600) 600dpi normal paper ≤ B5R
+V1 Duplex (Back)
5-30 5 5
7 +V2S-F (600) 600dpi normal paper ≤ B5R
+V2 single surface. Duplex
(Front)
5-30 22 22
8 +V2S-R (600) 600dpi normal paper ≤ B5R
+V2 Duplex (Back)
5-30 18 18
9 +V1 THICK (600) 600dpi thick paper > LTR
+V1
5-30 5 5
10 +V2 THICK (600) 600dpi thick paper > LTR
+V2
5-30 14 14
11 +V1 THICK S
(600)
600dpi thick paper ≤ LTR
+V1
5-30 5 5
12 +V2 THICK S
(600)
600dpi thick paper ≤ LTR
+V2
5-30 18 18
13 +V1 THIN (600) 600dpi thin paper > LTR
+V1
5-30 5 5
14 +V2 THIN (600) 600dpi thin paper > LTR
+V2
5-30 18 18
15 +V1 THIN S (600) 600dpi thin paper ≤ LTR
+V1
5-30 5 5
16 +V2 THIN S (600) 600dpi thin paper ≤ LTR
+V2
5-30 18 18
17 +V1 LABEL (600) 600dpi label paper > LTR
+V1
5-30 5 5
18 +V2 LABEL (600) 600dpi label paper > LTR
+V2
5-30 18 18
19 +V1 LABEL S
(600)
600dpi label paper ≤ LTR
+V1
5-30 5 5
20 +V2 LABEL S
(600)
600dpi label paper ≤LTR
+V2
5-30 18 18
21 +V1 OHP (600) 600dpi OHP > LTR +V1 5-30 5 5
22 +V2 OHP (600) 600dpi OHP > LTR +V2 5-30 14 14
23 +V1 OHP S (600) 600dpi OHP ≤ LTR +V1 5-30 5 5
24 +V2 OHP S (600) 600dpi OHP ≤ LTR +V2 5-30 18 18
25 +V1 POSTCARD
(600)
600dpi postcard/envelope
> 100mm +V1
5-30 5 5
26 +V2 POSTCARD
(600)
600dpi postcard/envelope
> 100mm +V2
5-30 26 26
27 +V1 POSTCARD
S (600)
600dpi postcard/envelope
≤ 100mm +V1
5-30 5 5
28 +V2 POSTCARD
S (600)
600dpi postcard/envelope
≤ 100mm +V2
5-30 26 26
29 +V1F (1200) 1200dpi normal paper >
B5R +V1 single surface.
Duplex (Front)
5-30 5 5
30 +V1R (1200) 1200dpi normal paper >
B5R +V1 Duplex (Back)
5-30 5 5
31 :+V2F (1200) 1200dpi normal paper >
B5R +V2 single surface.
Duplex (Front)
5-30 12 14
32 +V2R (1200) 1200dpi normal paper >
B5R +V2 Duplex (Back)
5-30 10 10
33 +V1S-F (1200) 1200dpi normal paper ≤
B5R +V1 single surface.
Duplex (Front)
5-30 5 5
34 +V1S-R (1200) 1200dpi normal paper ≤
B5R +V1 Duplex (Back)
5-30 5 5
35 +V2S-F (1200) 1200dpi normal paper ≤
B5R +V2 single surface.
Duplex (Front)
5-30 14 14
36 +V2S-R (1200) 1200dpi normal paper ≤
B5R +V2 Duplex (Back)
5-30 12 12
37 +V1 THICK
(1200)
1200dpi thick paper > LTR
+V1
5-30 5 5
38 +V2 THICK
(1200)
1200dpi thick paper > LTR
+V2
5-30 10 10
39 +V1 THICK S
(1200)
1200dpi thick paper ≤ LTR
+V1
5-30 5 5
40 +V2 THICK S
(1200)
1200dpi thick paper ≤ LTR
+V2
5-30 12 12
41 +V1 THIN (1200) 1200dpi thin paper > LTR
+V1
5-30 5 5
42 +V2 THIN (1200) 1200dpi thin paper > LTR
+V2
5-30 12 12
43 +V1 THIN S
(1200)
1200dpi thin paper ≤ LTR
+V1
5-30 5 5
44 +V2 THIN S
(1200)
1200dpi thin paper ≤ LTR
+V2
5-30 12 12
45 +V1 LABEL
(1200)
1200dpi label paper > LTR
+V1
5-30 5 5
46 +V2 LABEL
(1200)
1200dpi label paper > LTR
+V2
5-30 12 12
47 +V1 LABEL S
(1200)
1200dpi label paper ≤ LTR
+V1
5-30 5 5
48 +V2 LABEL S
(1200)
1200dpi label paper ≤ LTR
+V2
5-30 12 12
Item Content
Setting
range
Default
*1 *2