AR-M236/M276/M237/M277 SIMULATION 8 - 33
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Press the [START] key.
The display is shifted to the copy menu.
3. Select the paper feed tray and the print density.
Use the 10-key to set the exposure level.
4. Press the [START] key.
Copying is started.
(Exposure mode (Photo))
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
Operation/procedure
1. Select "1: COPY START."
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select "1: COPY START."
The currently set value is displayed beside the item.
2. Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
10 5.0 (GAMMA) Character/Photo level 5.0
(slant)
1-99 66
11 TS 1.0
(SHIFT)
Character/Photo (TS) level 1.0
(shift q’ty)
1-99 30
12 TS 1.0
(GAMMA)
Character/Photo (TS) level 1.0
(slant)
1-99 37
13 TS 2.0
(SHIFT)
Character/Photo (TS) level 2.0
(shift q’ty)
1-99 40
14 TS 2.0
(GAMMA)
Character/Photo (TS) level 2.0
(slant)
1-99 43
15 TS 3.0
(SHIFT)
Character/Photo (TS) level 3.0
(shift q’ty)
1-99 50
16 TS 3.0
(GAMMA)
Character/Photo (TS) level 3.0
(slant)
1-99 50
17 TS 4.0
(SHIFT)
Character/Photo (TS) level 4.0
(shift q’ty)
1-99 57
18 TS 4.0
(GAMMA)
Character/Photo (TS) level 4.0
(slant)
1-99 61
19 TS 5.0
(SHIFT)
Character/Photo (TS) level 5.0
(shift q’ty)
1-99 64
20 TS 5.0
(GAMMA)
Character/Photo (TS) level 5.0
(slant)
1-99 66
46-11
Purpose Adjustment
Function
(Purpose)
Used to adjust the shift amount and the inclination
value for each level (1 to 5) of the exposure mode
(Photo).
Item Picture quality Density
Item Content
Setting
range
Default
1
1.0(SHIFT)
Photo level 1.0 (shift q’ty) 1-99 32
2
1.0(GAMMA)
Photo level 1.0 (slant) 50
3
2.0(SHIFT)
Photo level 2.0 (shift q’ty) 41
4
2.0(GAMMA)
Photo level 2.0 (slant) 50
5
3.0(SHIFT)
Photo level 3.0 (shift q’ty) 50
6
3.0(GAMMA)
Photo level 3.0 (slant) 50
7
4.0(SHIFT)
Photo level 4.0 (shift q’ty) 56
8
4.0(GAMMA)
Photo level 4.0 (slant) 61
9
5.0(SHIFT)
Photo level 5.0 (shift q’ty) 62
10
5.0(GAMMA)
Photo level 5.0 (slant) 66
Item Content
Setting
range
Default
46-12
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment (1 mode automatic
adjustment)
Section FAX
Item Image quality
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
Item Setting range Default
1 COPY START ––
2 FAX EXP.LEVEL 0-99 50
46-13
Purpose Adjustment
Function
(Purpose)
FAX exposure level adjustment (Normal mode
individual adjustment)
Section FAX
Item Image quality
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
50
1
To Next Page
Loading...
