EasyManua.ls Logo

Sharp AY-XP12GHR - OPERATIONAL TIPS AND INDICATORS; AUTO MODE OPERATIONAL GUIDANCE; INDICATOR PANEL EXPLANATION

Sharp AY-XP12GHR
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
GB-9
During operation, if the outdoor temperature changes, the temperature settings will automati-
cally slide as shown in the chart.
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according
to the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
TIPS ABOUT INDICATOR PANEL
The indicator panel will change each time you press
the DISPLAY button in the following manner.
The room temperature is
displayed.
The outdoor temperature
is displayed.
No display.
the gures in ( ) are temperature settings
NOTES:
The displayed temperatures are rough estimates and may vary from the actual temperatures.
Temperature display ranges
Room temperature: 0°C ~ 40°C ( is displayed when less than 0°C and when higher
than 40°C)
Outdoor temperature: –9°C ~ 45°C ( is displayed when less than –9°C and when
higher than 45°C)
is displayed during the rst 60 seconds of operation while the temperatures are being
detected.
Only the room temperature can be displayed for 5 seconds when the unit is not in operation.
During SELF CLEAN operation, the indicator panel will display remaining time of the opera-
tion. Room and outdoor temperature will not be displayed even if you press the DISPLAY
button.

Table of Contents

Related product manuals