ENGLISH
GB-1
ENGLISH
Please read this manual carefully before using the product.
This manual should be kept in a safe place for handy reference.
•
IMPORTANT SAFETY INSTRUCTIONS
GB-1
• PART NAMES........................................ GB-3
• SETTING DEODORANT FILTER ......... GB-5
• USING THE REMOTE CONTROL ........ GB-6
• BASIC OPERATION .............................. GB-8
•
ADJUSTING THE AIR FLOW DIRECTION
.. GB-10
• PROGRESSIVE AIRFLOW ................... GB-11
• FULL POWER OPERATION ................. GB-11
• PLASMACLUSTER OPERATION ......... GB-12
CONTENTS
• SELF CLEAN OPERATION ................... GB-13
• ONE-HOUR OFF TIMER ....................... GB-13
• TIMER OPERATION ............................. GB-14
• AUXILIARY MODE ................................ GB-16
• MAINTENANCE .................................... GB-16
•
ADDITIONAL NOTES ON OPERATION
...... GB-18
• TIPS ON SAVING ENERGY .................. GB-18
• BEFORE CALLING FOR SERVICE ...... GB-19
WARNINGS FOR USE
1
Do not pull or deform the power supply cord. Pulling and misuse of the power supply
cord can result in damage to the unit and cause electrical shock.
2
Be careful not to expose your body directly to the outlet air for a long time. It may
affect your physical conditions.
3
When using the air conditioner for infants, children, elderly, bedridden, or disabled
people make sure the room temperature is suitable for those in the room.
4
Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.
5
Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding
may cause electric shock.
6
If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.
7
The appliance shall be installed in accordance with national wiring regulations.
Improper cable connection can cause the power supply cord, plug and the electrical
outlet to overheat and cause fi re.
8
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualifi ed person in order to avoid a hazard. Use only the
manufacture-specifi ed power cord for replacement.
9
Do not splash or pour water directly on the unit. Water can cause electrical shock or
equipment damage.
WARNINGS FOR INSTALLATION/REMOVAL/REPAIR
• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause
electric shock, water leak, fi re etc. Consult your dealer or other qualifi ed service personnel
for the installation/removal/repair of the unit.
IMPORTANT SAFETY INSTRUCTIONS
To Next Page
Loading...
