GB-6
USING THE REMOTE CONTROL
NOTES:
• The battery life is approximately one year in normal use.
• When you replace the batteries, always change both batteries, and make sure
they are the same type.
• If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
• If you will not be using the unit for a long time, remove the batteries from the re-
mote control.
Point the remote control towards
the unit’s signal receiver window
and press the desired button. The
unit generates a beep when it re-
ceives the signal.
• Make sure there is no curtain or other
object between the remote control and the
unit.
• The remote control can send signals from
up to 7 metres away.
LOADING BATTERIES
Use two size-AAA (R03) batteries.
HOW TO USE THE REMOTE CONTROL
Remote control
cover
1
Remove the remote control
cover.
2
Insert batteries in the compart-
ment, making sure the (+) and
(
-
) polarities are correctly a lign-
ed.
• The display indicates “AM
6:00” when batteries are
properly installed.
3
Reinstall the cover.
To Next Page
Loading...
Need help?
General
