GB-10
ADJUSTING THE AIR FLOW DIRECTION
VERTICAL AIR FLOW DIRECTION
COOL and DRY modes
HEAT mode
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air fl ow direction.
1
Press the SWING button on the remote
control once.
• The vertical adjustment louvres will
change its angle continuously.
2
Press the SWING button again when
the vertical adjustment louvres are at
the desired position.
• The louvre will stop moving within the
range shown in the diagram.
• The adjusted position will be memo-
rized and will be automatically set to
the same position when operated the
next time.
Adjustment range
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL
mode with the fan speed set to “SOFT (
)” for an extended period of time.
Condensation may form on the louvres.
HORIZONTAL AIR FLOW DIRECTION
1
2
To Next Page
Loading...
Need help?
General
