ENGLISH
GB-11
FULL POWER OPERATION
In this operation, the air conditioner works at maximum power to makes the room
cool or warm so rapidly that you can use it just after you come home.
1
To activate the FULL POWER operation, press the
FULL POWER button during operation.
• The remote control will display .
• The temperature display will go off.
• The green FULL POWER lamp ( ) on the unit will
light up.
TO CANCEL
Press the FULL POWER button again.
• FULL POWER operation will also be cancelled when
the operation mode is changed, or when the unit is
turned off.
• The green FULL POWER lamp (
) on the unit will
turn off.
NOTE:
• You can not set the temperature or fan speed during the FULL POWER operation.
1
PROGRESSIVE AIRFLOW
Press the PROGRESSIVE AIRFLOW button during cooling or dry operation when you
do not want to feel cold air. Vertical adjustment louvres are set obliquely upward to
deliver cool air to the ceiling.
Press the button during heating operation. Vertical adjustment louvres are set
downward to deliver the warm air down to the fl oor and warm you.
1
During operation, press the PROGRESSIVE
AIRFLOW button.
• The remote control will display .
TO CANCEL
Press the PROGRESSIVE AIRFLOW button.
NOTES:
• The PROGRESSIVE AIRFLOW setting is cancelled
when you press FULL POWER button while
PROGRESSIVE AIRFLOW is set.
• If you want PROGRESSIVE AIRFLOW operation in
FULL POWER mode, press PROGRESSIVE AIRFLOW
button during FULL POWER operation.
1
To Next Page
Loading...
Need help?
General
